Flow
Ulrasonic clamp on type flow meter
Application
Ultra-pure liquids.
Water.
Chemicals.
Raw sewage.
Reclaimed water.
Cooling water.
River water
Features
Accuracy: 1%
Ingress protection level: IP67 (transmitter), IP68 (sensor)
Wide measurement range, pipe size from DN15mm to DN6000mm.
Installation types: wall mounting, DIN-rail mounting
Could be installed without shut down equipment operation
Technical Specifications
Type: Ultrsonic clamp on type
Principle: Transit-time ultrasonic
Pipe diameter: 50mm-700mm
Accuracy: ±1%
Flow rate: 7m/s
Output: 4-20mA and RS485 MODBUS simultaneously
Straight pipe: upstream10D, downstream5D, 30D from the pump
Display: LCD with backlight
Protection: IP67
Medium temperature: -30~160°C
Work environment: -20~60°C & 85%RH non condensing
Power supply: 24VDC/230VAC
Approval: CE
Inline type Electromagnetic flow meter
Application
Petroleum, chemical engineering, steel.
Food, electricity, paper, water treatment.
Water supply, heat supply, environmental Protection and other industries.
Features
Excellent measurement repeatability and linearity
Good reliability and anti-interference performance
Good pressure resistance sealing ability
Standard RS485 serial communication interface
Variety power supply and signal output
Supports standard MODBUS protocol and GPRS
Low pressure loss measurement tube
High intelligentization, Maintenance-free, With LCD display
Technical Specifications
Type: Electromagnetic inline type
Principle: Faraday’s law
Pipe diameter: as per site requirement
Accuracy: ±0.5%
Output: 4-20mA and RS485 MODBUS simultaneously
Units: l/m, l/h, m3/h, gpm/h
Straight pipe required: Upstream ≥5DN, downstream ≥3DN
Process connection: Flange, Tri Clover, Thread
Display: LCD display
Protection: IP65
Power supply: 24VDC or 220VAC
Approval: CE
Insertion type Electromagnetic flow meter
Application
Acid
Water
Sewage water
Features
Simple structure, no moving parts, long service life.
Don’t need lining, don’t need ground ring, small volume, light weight, convenient installation.
Insertion electromagnetic flow meter with stop valves can realize the installation, dis-assembly, easy maintenance and maintenance when continuous streams.
Flow measurement is only related to insert depth, so with the feature of wide commonality, strong interchangeability.
A model can be applicable to all kinds of pipe flow measurement requirements.
Technical Specifications
Nominal diameter : DN200-DN3000mm
Accuracy : ±1.5% of FS
Output signal : 4-20mA
Display: LCD
Communication : RS485 Modbus RTU
Protection : IP65
Supply voltage : 24VDC or 230Vac
Approval: CE
Turbine type flow meter
Application
Process Control.
Water injection.
Chemical injection.
Fuel flow measurement.
Monitor fuel supply to ship engines.
HVAC.
Water metering.
Features
Accuracy: Default type: ±1%, ±0.5% optional
Good repeatability. Repeatability of the product could reach to 0.05%~0.2% in short term.
No zero drift and with strong anti- interference performance.
Wide range ratio, middle and large diameter could reach to 1:20 and small diameter could reach to 1:10;
Compact and light structure, easy for installation and maintenance;
Suitable for high pressure measurement.
Technical Specifications
Medium : Non-corrosive, low velocity liquid, without impurity.
Accuracy : ±1% of FS
Output : 4-20mA, RS485 Modbus
Medium temperature : -20℃~+80℃
Body Material : SS304
Display: LCD
Connection type: Flange, Tlhread
Protection : IP65
Approval: CE
Vortex type flow meter
Application
Widely used in Paper, sugar, various beverages Water supply and drainage, environmental protection.
Water conservancy engineering, steel, petroleum, mining,Pharmaceutical, heating, water supply.
Hot steam, saturated steam, compressed air.
Features
No moving parts, no wear, no mechanical maintenance and long service life
The probe and signal converter are universally interchangeable
Split type signal converter can be used, the cable can be up to 10 meters long.
Output 4-20mA current signal / pulse signal, or Modbus RS485 signal
Technical Specifications
Nominal diameter (mm) : DN15~DN300
Measuring medium : Gas, liquid, steam
Type : Integrated type, Remote type
Medium temp. : -40~350℃
Material : SS304, SS316, others are optional
Accuracy : ±1% of F.S.
Display: LCD
Output : 4-20mA
Communication : RS485 Modbus
Protection : IP65 Standard type, IP67 Remote type
Power Supply : 24VDC
Water Flow Switch
Application
Paddle switch, suited for pipes of industrial plants: heating and air conditioning, refrigeration systems and heat pumps. Flow control of water and normal media.
Flow switch applications include pump staging, pump or valve failure, flow or blockage detection, and flow protection. They are commonly used in reservoirs and tank storage systems to keep the tanks at the designated level, as well as in pipelines to ensure that the media flow through the pipe is continuous. Large flow switches can be found in commercial and large buildings for HVAC system.
Features
NPTWFS liquid flow switch is used to monitor the flow change
Renovated SPDT micro-switch ensure the reliable switch function
3 stainless steel blades for diameter of 25-75mm pipeline
6 additional blades for 100-150mm pipe
Various connections are available on request
Max working pressure 13.5Bar
Electrical loading AC250V/10A
Technical Specifications
Type : Paddle type
Medium : Water (Hot, Chilled, Well, Pool and Sea Water)
Operating temperature range : -10~120°C
Switch output : 1 SPDT, 10A/250VAC
Process connection : 1” NPT(M)
Paddle material : Stainless Steel
Parts material in contact with fluid : Brass
Protection : IP54
Approval : CE