Level
Ultrasonic Type Water Level Transmitter
Application
Sewage / waste water / tap water treatment equipment. Such as open tanks, dams and wells.
Liquids such as edible-oils, sauces and beverages.
Chemical material such as solvent, paints, carbonic acid, water lime slurry and wax.
Granular materials such as flour, wheat and corn.
Chemical fibers, petrochemical materials such as plastic powders, plastic granules and plasticchips.
Features
Wide voltage range
Measure a variety of parameters
Analog output can be adjusted arbitrarily
Support custom serial data format
With arbitrary setting of the start point and end point of the output range
With value-added/difference ranging options, both distance and level can be measure
Technical Specifications
Type: Ultrasonic type
Measuring range: 0-5meter, 0-10meter, 0-15meter, 0-20meter, Other
Accuracy: ±0.5% of FS
Display: LED or LCD display
Output: 4-20mA, 0-10VDC, RS485 Modbus, 2 relays
Connection: Thread
Ingress Protection: IP65
Power supply: 24VDC
Approval: CE
Submersible Type Water Level Transmitter
Application
Depth and level measurement in: Wells, Reservoirs, Lakes, Rivers, Sewage treatment plant, Water tank, Ground water monitoring, Surface water
Features
Integrated construction, unnecessary to do outer adjustment
Sensor housing protection IP68, connection box protection IP65
Cost-efficient, high reliability and stability
Technical Specifications
Type: Piezo Resistive
Range: 0-1m……200m (as per requirement)
Accuracy: ±0.5% of FS
Housing: SS316 (Optional SS316L is available)
Diaphragm: SS316 (Optional SS316L is available)
Output: 4-20mA (2-wire); 0-5/10VDC (3-wire), RS485 Modbus
Power supply: 24VDC
Approval: CE
Flameproof Submersible Type Diesel Level Transmitter
Application
Diesel application
Deep well level measurement
Sewage treatment
Hydraulic monitoring in rivers and sea
Reservoir level measurement
Features
It has high accuracy, small volume, stability, plus resistance to abrasion, oil, acid & alkali and high intensity gas lead
cable ensured that it can meet the different occasions measurement requirements.
This product has got intrinsic safety certification, explosion proof certification and CE certification.
Technical Specifications
Type: Piezo Resistive
Range: 0-1m……200m (as per requirement)
Accuracy: ±0.5% of FS
Housing: SS316 (Optional SS316L is available)
Diaphragm: SS316 (Optional SS316L is available)
Output: 4-20mA (2-wire); 0-5/10VDC (3-wire), RS485 Modbus
Power supply: 24VDC
Approval: CE, Flameproof Enclosure
Cable Float Type Water Level Switch
Application
To measure level of the tanks
Features
It can test the pressure of the liquid.
The float switch is a switch that regulates fluid level in the tank or well etc.
The float switch is resistant to water (sewage water)
Technical Specifications
Type: Top mounted
Switch type: Micro switch
Cable Length: 3m, 5m, 10m, 20m, 50m (As per requirement)
Float Material: Polypropylene
Output: Low level and High level, 1SPDT contact
Protection: IP68
Approval: CE
Flameproof Top Mounted Level Switch
Application
Diesel application
Fuel application
Sewage / waste water / tap water treatment equipment. Such as open tanks, dams and wells.
Chemical material such as solvent, paints, carbonic acid, water lime slurry and wax.
Granular materials such as flour, wheat and corn
Features
Top mounted magnetic float level switches are widely used in liquid level control and alarm in open and closed container in lines of industrial, civil architecture, water and sewage.
It is a safe, economic, reliable, using flexible level controller with various functions.
level switches are consisting of magnetic floater, stable leader, reed switches, explosion isolation type wiring box and installing fittings.
Magnetic floater moves with liquid level up and down, and the reed contactors in the leader changing on and off switch and output the signal accordingly.
Reed tube contactors changing on and off instantaneously, and match with relays, it can realize various high pressure and large current control. The read contactors are strictly sealed in glass which were filled with inactive gas, so the contactors won’t generate spark when contactors on or off. It can control the liquid level safely.
Technical Specifications
Type: Top mounted magnetic float type
Switch type: Reed Switch / Micro switch
Measuring range: 0-1meter, 0-2meter, 0-3meter, 0-4meter, Other
Head material: Die-Cast aluminium enclosure / Flameproof IIA/IIB class
Float material: SS304, SS316, SS316L
Electric contacts: 2SPST, 1A/3A 220VAC (Low level and High level)
Contact types: Normally open (NO), Normally close (NC), NO/NC
Connection Thread or Flange
Protection: IP66
Approval: CE, CCOE, CMFRI